Meyco Pool Cover Hardware & Accessories
Hardware and Accessories
The “best” pool cover should be secured with the “best” hardware. That’s why all Meyco hardware is non-corrosive, solid brass or stainless steel…never plastic!
Our stainless steel buckles and aluminum strap tips won’t rust or stain your swimming pool decking and our stainless steel wall anchors won’t stain rock walls like others made of lead or zinc.
One of Mr. Meyer’s first inventions, industry standard screw type anchors are included with your cover order. These standard brass anchors are designed to quickly twist open and lie flush to the surface when closed. Perfect for concrete and other solid surfaces like slate, stone or other solid set decking.
One twist to open and one twist to close. A custom option for your cover, Meyco’s pioneering pop-up anchors lie flush to the surfaced when closed and automatically open to the perfect height when in use. Made of brass, these anchors are designed for concrete and other solid surfaces like slate or stone.
Meyco’s long anchors are 2 1/8″ long give and a great anchor option for Ipe wood decking or other areas where you need a little something extra.
Uniquely designed to fit Meyco brass anchors, these deck flanges (collars) fit snug around the top of Meyco’s screw-type anchors for a polished, professional finish on your deck.
Wood Deck anchors are designed to hold Meyco covers securely on wooden and composite decks. These 2″ diameter anchors twist open and lie flush to the surface when closed.
9” Pipe Anchor – perfect for pools with paver decks or other irregular services like dirt or planter areas
18” Pipe Anchor – designed for pools with paver decks, loose brick or garden/lawn areas near the pool
Perfect for planter areas. These 16” Lawn Spikes are perfect for planter areas. With four fins around the perimeter, lawn spikes grip into the soil to ensure a secure fit and greater holding power. Spikes can be removed or tamped down to conceal during swim season.
Meyco’s 18” Lawn Pins go deeper into the soil. Shaped similar to a nail, these lawn pins can be used in lawns, landscaped areas and where soil is extra rocky. Lawn Pins are the perfect choice for smaller spaces where you need strong holding power in less room.
Perfect for wood or aluminum decks, Meyco’s on-ground brackets are designed to install in areas where drilling isn’t an option for an on-ground pool.
Meyco’s stainless steel wall anchors secure your cover to raised wall applications and won’t stain rock facing. For special veneer facing walls, Meyco recommends our extra long wall anchors, available in 4″, 5″ and 6″ lengths.
Meyco’s stainless steel eye-bolt wall anchors secure your cover to raised wall applications and won’t stain the rock wall facing. For special veneer facing walls, Meyco recommends our extra long wall anchors, available in 4″, 5″ and 6″ lengths.
Included with your cover order, these 7.5” springs have a load bearing strength of 1,500lbs. Designed to pull apart if overloaded, this money-saving feature can save your cover from costly repairs.
Also available in “heavy duty” 8″ stainless steel.
Meyco’s Heavy Duty Spring is 8” long with a load bearing strength of 1500 lbs. Designed to pull apart if overloaded, this money-saving feature can save your cover from costly repairs.
These 5.5” springs are ideal for areas with short decking. Designed to pull apart if overloaded, this money-saving feature can save your cover from costly repairs.
These thicker-than-standard polyvinyl sleeves slide snugly over cover springs to protect your deck and keep the springs from snagging on your cover when in storage.
Included with your cover order, this standard 24” stainless steel installation rod is used to install and remove your cover from deck anchors. 36″ installation rod is also available for commercial covers and dealer use.
Included with your cover order, this ¼” x 15” long hex key is used to raise and lower all deck anchors.
Included with your cover order, these standard buckles are placed on every strap for easy spring attachment and adjustment
Used to tighten a cable on a wall application. One end of the turn buckle is attached to an anchor. The other side is attached to the cable. Once the cover is attached, the turnbuckle is used to pull the cover up to the wall tightly. To get a stronger pull more than one turnbuckle may be used.
These stainless steel snap hooks attach covers securely to various wall/raised applications. The 360 degree pivoting snap pulls the cover snug to the obstruction keeping debris out and maximizing safety. D-ring option also available
A stainless steel D-ring is used to close gaps on the cover around custom features like leg and hand rail cutouts.
These stainless steel O-rings may be sewn onto the edge of a cover in place of springs in areas with very short decking.
Extension straps lengthen a strap on the cover to ensure your cover is pulled taut. Designed with Meyco’s quality webbing, extension straps come with a buckle and an O-ring sewn to one end for easy installation. Please specify color when ordering.
Meyco’s Yoke Strap Assembly is used to secure an anchor that had to be installed around features like a dive stand or slide that can’t be removed. The yoke strap is designed to split around those features, attaching to the anchor and ensuring a taut cover. The Yoke Strap Assembly includes: yoke strap, 2 standard springs, 2 standard spring covers and 2 anchors.
Automatic pumps are designed for use on Meyco solid covers without drains.
Included with your cover order. These storage bags are perfect for off-season storage of your Meyco cover.
Available from Your Local Swimming Pool Company
Meyco Pool Covers and accessories are available from Authorized Meyco Dealers.