8 11, 2019

Why does the water level have to be within 18″ of the cover?

2019-11-08T06:27:31-05:00

Meyco safety covers use material that is designed to flex and stretch under pressure. When subjected to weight loads, the cover will depress until it comes in contact with the pool water. The water then acts as an additional support base and removes excess tension from the springs and webbing, extending the life of your [...]

Why does the water level have to be within 18″ of the cover?2019-11-08T06:27:31-05:00
8 11, 2019

Should I drain my pool before putting on my MEYCO safety pool cover?

2019-11-08T06:26:50-05:00

No! Maintaining the proper water level in your pool between swim seasons helps support the weight of snow and ice on your cover and prevents excess wear. Meyco recommends keeping the water level within 18” of the coping. Damage to your cover that occurs if the proper water level is not maintained will not be [...]

Should I drain my pool before putting on my MEYCO safety pool cover?2019-11-08T06:26:50-05:00
8 11, 2019

What maintenance do I need to do for my Meyco cover during the winter?

2019-11-08T06:25:31-05:00

Before you cover and close your pool for the winter be sure the pool water is properly chemically treated. The water chemical level should be checked in early spring or when there is any period of warm temperature. Proper adjustment of chemicals should be made if necessary. Follow this checklist of things you need to [...]

What maintenance do I need to do for my Meyco cover during the winter?2019-11-08T06:25:31-05:00
8 11, 2019

How long does it take to remove and store my pool cover?

2019-11-08T06:24:20-05:00

A typical Meyco stock-sized safety cover can be installed and removed in about 15 to 20 minutes after the initial installation using the provided tensioning tool/installation rod. Large or custom covers may take longer. Here’s a quick video that guides you through how to store your cover while your pool is open. Each Meyco cover [...]

How long does it take to remove and store my pool cover?2019-11-08T06:24:20-05:00
8 11, 2019

Why do I need a pump for my solid pool cover?

2019-11-08T06:18:23-05:00

Meyco’s Permaguard solid covers block 100% of the sun’s rays, reducing UV damage to your pool and allowing protective chemicals to remain in the water longer for a faster, cleaner pool opening in the spring. However, the solid material does not allow water to drain from the cover. A pump must be used at all [...]

Why do I need a pump for my solid pool cover?2019-11-08T06:18:23-05:00
8 11, 2019

Is it easy to remove and store the cover?

2019-11-08T06:16:59-05:00

A typical Meyco stock-sized safety covers can be installed and removed in about 15 to 20 minutes after the initial installation using the provided tensioning tool/installation rod. Large or custom covers may take longer. Here’s a quick video that guides you through how to store your cover while your pool is open. Each Meyco cover [...]

Is it easy to remove and store the cover?2019-11-08T06:16:59-05:00