For decks and/or coping that are rough, Meyco can add padded anti-abrasion strips to your cover. These strips provide added protection at typical wear points where webbing straps ride over the coping edge. Strategically sewn into the cover at key points, Meyco’s padded anti-abrasion strips protect your cover with a 1” foam barrier between the [...]

Meyco’s Restoration Center is the easy way to schedule a repair for your cover. Your first step is to contact your Meyco dealer and tell them your Meyco cover needs repair. Next, Meyco will issue you – or your Meyco dealer – a Return Goods Authorization (RGA) form that will schedule your cover for an [...]

Damage to hardware is not covered under Meyco’s 12-year pro-rated warranty. Torn straps, bent springs and similar damage to your hardware are typically clear indications of an excessively heavy load on your cover (often snow and/or ice). This type of damage may also indicate that your pool’s water level has fallen below 18” from the [...]

Meyco created  this short video that demonstrates how to fold your cover. https://www.youtube.com/watch?v=B_sjqp7NMas The best way to pack your cover is to fold the cover the long way, like an accordion. Then roll the cover like a like sleeping bag. Next, tie a string or rope on the ends to keep it secure. You can [...]

Meyco’s custom covers are specifically manufactured for each individual pool and cannot be returned or exchanged. Before you order your Meyco cover, consult with an Authorized Meyco dealer to make sure that the type of cover (MeycoLite Mesh, RuggedMesh or PermaGuard solid) is the right cover for your pool. Also consider the color of the [...]

Completing and returning your Meyco cover warranty card is a very important step and will be very helpful in the future if your cover is ever damaged or needs replacing. Meyco keeps a complete library of every cover that we design. Your cover’s unique plan number is printed on the warranty card that came with [...]

If there is no excess snow or other debris on your cover, a sagging cover could signify that your cover is improperly tensioned. Make sure that your straps are tight and that the springs are 50-75% compressed. You may need to do some adjustments to bring your cover to the correct level of tension. [...]

You can remove old anchors with a little bit of work and a few tools. The least expensive option is to purchase a number 7 screw extractor from a local hardware store, and with a little bit of elbow grease they often come right out. A faster extraction method is to purchase a Wingmaster kit.

Yes. You can leave your Meyco cover on the pool while operating the system. Be sure to keep the cover taut. Chemicals may be added to the pool water using a floating or automatic chlorinator. Chemicals should never be poured directly on the cover.

Algae growth is determined by a number of factors including the concentration of preventative chemicals, sunlight, air temperature and the length of time that the pool is closed. For example, a pool closed just after Labor Day runs a greater risk of reduced chemical concentrations (and protection) than one which remained open until Thanksgiving. The [...]